Simple liquid dispenser for auto-cocktails

[Qdot] came up with a simple way to dosing out liquids to use in his Bartris project. As you can see above, flexible tubing is connected to some inverted bottles that house the liquid. A chopstick is attached to a board on one end, and via string to a servo on the other. When the servo turns it pulls the chopstick tight against the board, cutting off the flow of liquid through the tubing. This isn’t as elegant as the system the Bar2D2 uses but it’s a heck of a lot less expensive.

You can check out some of the build pictures in his Flickr pool. He’s included this concept in a project he calls Adult Mario. Watch the video after the break but the quick and dirty is that the more coins you score in Super Mario Brothers, the more beverage is rationed out into your cup. Ah, human lab rats, is there nothing they won’t do for booze?

Read the rest of this entry »

Read more...

Water the tree – there’s an app for that?

Well no, but [Chris] needed something to remind him when to water the tree. Most folks would use their nifty iPhone to set up a calendar reminder, but why do that when you can purpose a 32 bit microcontroller to do it for you?

To detect a falling water level [Chris] attached a two-pin header to the end of a clothes pin clipped to the side of the tree stand. When the water level is covering the pins it completes a circuit, verified by a measurable current. When the water level drops the mbed microcontroller detects the loss of conductivity and through some creative code sends out an email and SMS reminder.

If you’re in love with your iPhone but not your living things, this will keep that tree kicking until after the new year.

Read more...

Ionocraft aka Lifters

It’s hard to believe that in five years we haven’t covered lifters before. This realization was sparked when [Tyler] tipped us off about a lifter project demonstrated at the Kansas City hackerspace called CCCKC.

Lifters, the casual name for ionocraft, fly without combustion or moving parts. We’re not going to tackle the particulars of what makes flight possible, but high voltage is required to feed the phenomenon that provides the lift. One of the first comments when we asked what to do with old CRT monitors was to use them for lifters. The flyback transformer puts out plenty of voltage if you can tap into it without killing yourself (no, seriously, that’s an issue).

This is the method that the CCCKC folks used. Take a peek at the video after the break. If you’re thirsting for more fun with lifters, stop by the Lifter Project.

Read the rest of this entry »

Read more...

Overly complicated gas guage

While this is most likely overkill for a gas gauge, we do thank [VadimS] for sharing the information. He shows us how to build a capacitive liquid sensor using an Arduino, some foil and some wire. He’s basically detecting the difference in capacitance between the foil sheets. As he gets more water in the bottle, the capacitance goes up. At least we think thats what is going on. He has included the source code for the Arduino, both for handling the sensor and running the LCD display shown in the picture above. When completed, this will be used in his dune buggy for a gas gauge.

Read more...

Homebrew Kodachrome

What do you do if you can’t find the film that your camera uses? The answer seems pretty simple, you just make it yourself. Making film is not a simple task. There are multiple stages involved and it all has to be done in complete darkness. This project is causing a bit of stir in its respective communities. Though not completely finished yet, it is already an impressive piece. Everyone is waiting eagerly for it to be completed. You can find a few of the discussion groups linked from the flickr page.

[via BoingBoing]

Read more...